Does your PE Barricade's shoulder armors went loose after many times of play? No worries! I'm gonna write a guide on how to make them less floppy. NOTE: This is a one-way fix, you can't do this in the second time! 1. Disassemble the arms, and remove the armors pieces from the shoulder. (It's fairly easy to remove.) 2. Add one thin layer of glue (and I mean it!) inside the armor's socket. 3. Permanently glue the beige port that swivels the armor piece. (apply it underneath the piece, not the entirety) And lastly, reassemble the parts. (Please make sure you assembled the pieces correctly.) And there you have it; Barricade shoulder armors are now less floppy and the construction now feels tight. Hope this helps!