Omnigonix V-01 Spinout - MP Scaled Sunstreaker

daimchoc · Jun 19, 2014

Pre-orders:

BBTS: OG-01 Spinout - Third Party Transforming Toys & Accessories Omnigonix
The Chosen Prime: Omnigonix V-01 SPINOUT
TFSource: Omnigox - OX-01 Spinout
Toy Dojo: Omnigonix Spinout OG-01 ( Not Sunstreaker )

Update: 20160509

Omnigonix said: ↑

Here we are - apologies for the less than stellar phone-photos.

First image shows correct position of chest plate, back plate position (requires a little jiggle and massaging while flipping/locking the back into place), correct tabbing of the collar plates under the head and alternate head installed.

Second image shows the chest in correct position + neutral pose.

I should also mention the there are clips on the rear wheel braces that lock inside the torso (onto rails) in robot mode when one successfully puts the back plate into position - hard to photograph but you'll see once in hand.

I'll post the neck fix over the next few days - I'm not as freely available as I once was. Sorry!

*Thanks again to the fans and supporters
Click to expand...

Update: 20160430

https://www.facebook.com/DaimChocReports/posts/257983891218712

Update: 20160423

https://www.facebook.com/DaimChocReports/posts/254397838243984

DukeFett said: ↑

A few more pics:
Click to expand...

Update: 20160301

Omnigonix said: ↑

test shot
Click to expand...

Omnigonix said: ↑

Close up
Click to expand...

Update: 20160125

Update: 20151130

https://www.facebook.com/DaimChocReports/posts/179075692442866

daimchoc · Jun 19, 2014

Update: 20151110

Update: 20150528

Update: 20141025

Interview with Omnigonix with G1Hextron's Cybercast

https://www.youtube.com/watch?v=T8cKDXU0oYU

ETA for release has been moved to January of 2015.

Update: 20140903

Update: 20140829

Update: 20140827

Omnigonix said: ↑

hood panels end up inside the torso.
Click to expand...

Update: 20140824

As posted by Omnigonix

Omnigonix said: ↑

- Fully painted ala MP-12, that is to say yellow, black and silver paint apps.
- No red shoulders.
- Slot in windshield is for wiper.
- No chrome planned. Not in the budget.
- Height is adjustable by some mm. Spinout was always a few mm taller, as seen in previous schematic
Click to expand...

Update: 20140823

Update: 20140814

Update: 20140810

Update: 20140719

Update: 20140717

Final Renders

Update: 20140706

Omnigonix said: ↑

Hello everyone

Lets get back on track - we do value your opinions, and we do pick and choose any comment that we feel will better our product.

In good faith and as a token of appreciation for the enthusiasm - we present the final designs of the helm and face sculpts.

We took on board the advice and amended the problem areas we had overlooked.

We've included chin armour and without on the 'G1' ears, easy to do as it only requires deleting that chin object.

Keep in mind they are all interchangeable to give you a possible 16 different combinations.

We also wanted to personally thank those members who take time to Photoshop (and MSpaint!) their suggestions - we appreciate that, and the skills involved.

Depending on a variety of factors we may not be able to produce ALL of the faces and/or helmets. But here's hoping we can.

- Omni
Click to expand...

Referred to the IDW art.

Update: 20140704

Omnigonix said: ↑

Hello everyone,

Just a small update from us here at Omnigonix; Head sculpt is finished!!!

Working on additional faces (swappable) and also shortly; new renders of the final design in both modes. We thank you for your patience.

Please have a look at the 3 different 'ear' designs - we plan on making 2 versions available, however not being a fan of the 'cartoon' ears, we can't seem to decide on one of the designs (A or C - A has a broader silhouette and C is slightly shorter).

Note; The red piece in the back of the head is the place holder for a screw.

Updates (pictures) shortly! Have a great weekend everyone.

Thank you.
Click to expand...

http://www.tfw2005.com/boards/attac...-01-spinout-mp-scaled-sunstreaker-ss_061b.jpg

Omnigonix said: ↑

Hello everyone - apologies, we've received some messages that the angles of the last image were a bit off to fully compare the options.

Please find attached the new front-on screen-captures to show you the different ear options. The lettering remains the same.

I have added another option of 'D' which is more in line with some of the comic renditions of said 'bot.

@David Hingtgen - the reason the side skirts aren't modelled is because it'd cause too much bulk to the legs and love-handle area of Spinout when in bot mode - we're getting the message that he isn't quite G1 accurate with his apparent stockiness, so we're aiming not to add any unnecessary bulk.

We're looking forward to showing you the final sculpt as there are some new details (in both modes) which we ourselves really love - and we hope you will too.

Enjoy.
Click to expand...

http://www.tfw2005.com/boards/attac...-01-spinout-mp-scaled-sunstreaker-ss_062b.jpg

Update: 20140701

Omnigonix said: ↑

No rubber tyres, lads. I'm afraid.
Click to expand...

Update: 20140624

Omnigonix said: ↑

Hello again, everyone!

We're hard at work getting the final details pegged down (yes the head sculpt is being finalized and sculpted!), but we thought we'd stop by and post an image which shows the dimensions of our figure along with a rather static example of the shoulder's range of motion, which is 90 degrees.

Note the transparency of the windshield will expose the sculpted abdominal section - as seen marked in red on the right of the image.

We're also working on the shoulder bar/rod between the shoulder and the body - to make it more sturdy and improve the visuals/silhouette.

I ask for you to consider the real-world dimensions and properties of the design and understand that some things are they way they are due to structural integrity and aesthetic design - and we strive not to compromise on either.

Thank you again for all the positive response and patience.
Click to expand...

Update: 20140620

Here's what was passed on to me via the Omnigonix representative. BTW, they are working on their presence on Social Media.

Some notes from them:

- Head sculpt is proxy, not at all final. There are limitations on the dimensions of the bounding box area due to transformation but things like the actual face sculpt and other small details are yet to be done. We've left this until last moment to get it just right. There will be options for the face/head sculpt - depending on budget constraints/time. We have plans for this and want to see them to fruition - We do have several redecos in mind.

- The ONLY parts forming are the 2x blaster nozzles - one of which you see attached to the wrist. The figure does indeed have TWO hands. The blaster nozzles are optional.

- There will definitely be no car badges.

- Some small details are missing from the alt mode test render as they were not made yet - still more small details to come for the car body that will be in the final renders. The final renders will come when we have completed the head sculpt.

- He is absolutely MP scale. In fact We have taken great care to scale him in bot mode to his 'brother'. From the neck down, every major body part/joint should line up 1:1. His head crest is a couple of mm taller than Sideswipe and the backpack intakes make him a tad taller still.

- Alt mode is nearly 1:1 to Sideswipe/Alert, bar some cosmetic liberties - but overall dimensions will match.

- All new sculpt - no re-used or copied designs elements. Some design element inspiration from MP-12 to get them to match, paying homage to the cartoon - but entirely new.

- Thigh flaps are NOT car seats. This has no interior.

- Constructive criticisms are well received (either harsh or not, but honest and informative) and We will take under advisement if we think it will improve the product. We are watching the forums.
Click to expand...

Update: 20140619
I just received this from an anonymous source.

"It is in the final design phase with only a few more minor tweaks before prototyping and then due for release Q4 2014 if all goes well.

Please note in the render that head sculpt is not 100% final and there will be options for varying degrees of cartoon/toy/comic accuracy.

More images will be available in the coming weeks. We expect to have a prototype in-hand in the coming months."

They welcome constructive criticism. Please let them know.

Digibash from unexpectedpanda.

Onslaught24 · Jun 19, 2014

Where do you keep gettin all this stuff man?

Seriously though, that looks sick! A bit kibbly but still awesome.

deathsheadII · Jun 19, 2014

this is actually looking interesting...wonder if it will push a tt release

might actually been down for buyng this

MasterpieceMP33 · Jun 19, 2014

Looks promising.

DragonPrime120 · Jun 19, 2014

Holy crap man, I'm super excited! Christmas present?

daimchoc · Jun 19, 2014

I again received an anonymous correspondence. Looks like this one isn't related to the Blitzwing that was passed on to me before. I'm just sharing what was sent to me. For now that's what we have.

Skywarp181 · Jun 19, 2014

Looks good!

DogFriedRice · Jun 19, 2014

Another definite buy...good stuff.

Ionus · Jun 19, 2014

Looks dope. Car feet done right. Wheels look really small though.

deathsheadII · Jun 19, 2014

have they used mp12's shoulder's?

Harleytron · Jun 19, 2014

interest sent

deathsheadII · Jun 19, 2014

notice something? .... no silhouette

Honesty · Jun 19, 2014

Dear Darwin ....... That is BEAUTIFUL. Head looks a little .. Don't know? So glad they mentioned different heads.

But man... I am super excited for this. That is awesome.

Ricky_Stream · Jun 19, 2014

Looking good so far!

pumpkingonzo · Jun 19, 2014

DogFriedRice said: ↑

Another definite buy...good stuff.
Click to expand...

Absolutely!!
This looks great.

And thanks daimchoc.
You're a star
I really appreciate your work and dedication. I think I learn more from you lately than anyone else

craftsmith · Jun 19, 2014

Holy shh...... That looks awesome, im sold already.

deathsheadII · Jun 19, 2014

so looking at the description again there are bits included to do what you want to do with it ie: the face and detailing on the leg?

looks like its going to be one solid bot and going to fit in perfect with the mp line from what we see....good to see another 3rd party give it a fuck you tt not waiting on something that may never happen lol

someone needs to make a spot on jazz and i mean spot on!!! enough of you talented fo;k on here enough to..and keep it in line with the mp bots being released.....so many getting away with it why not whilst it lasts ..supply and demand

Zavien · Jun 19, 2014

pumpkingonzo said: ↑

Absolutely!!
This looks great.

And thanks daimchoc.
You're a star
I really appreciate your work and dedication. I think I learn more from you lately than anyone else
Click to expand...

+1 bro, completely agree.

BScorpinok75 · Jun 19, 2014

Onslaught24 said: ↑

Where do you keep gettin all this stuff man?

Seriously though, that looks sick! A bit kibbly but still awesome.
Click to expand...

Dude he's like the 3P TF whisperer or something

Log in or Sign up

Omnigonix V-01 Spinout - MP Scaled Sunstreaker

daimchoc Well-Known Member

Attached Files:

10333469_511912508908257_8522882102063768467_o.jpg

10463711_511993868900121_3123526176710832037_o.jpg

10440917_512116098887898_7084039678107893599_n.jpg

1531574_512116095554565_3316878712335894961_o.jpg

10731106_646427248790115_867516246524435824_n.jpg

daimchoc Well-Known Member

Onslaught24 GATTAI Moderator News Staff

deathsheadII Not a Bounty Hunter yes?

MasterpieceMP33 Well-Known Member

DragonPrime120 Can I kick it?

daimchoc Well-Known Member

Skywarp181 Well-Known Member

DogFriedRice Well-Known Member

Ionus Well-Known Member

deathsheadII Not a Bounty Hunter yes?

Harleytron Decepticon

deathsheadII Not a Bounty Hunter yes?

Honesty honestly, Honesty!

Ricky_Stream Well-Known Member

pumpkingonzo Stunticon lover!

craftsmith Flying Spanner

deathsheadII Not a Bounty Hunter yes?

Zavien Veteran

BScorpinok75 Squadron X #1 Consultant

Log in or Sign up

Omnigonix V-01 Spinout - MP Scaled Sunstreaker

daimchoc Well-Known Member

Attached Files:

10333469_511912508908257_8522882102063768467_o.jpg

10463711_511993868900121_3123526176710832037_o.jpg

10440917_512116098887898_7084039678107893599_n.jpg

1531574_512116095554565_3316878712335894961_o.jpg

10731106_646427248790115_867516246524435824_n.jpg

daimchoc Well-Known Member

Onslaught24 GATTAI Moderator News Staff

deathsheadII Not a Bounty Hunter yes?

MasterpieceMP33 Well-Known Member

DragonPrime120 Can I kick it?

daimchoc Well-Known Member

Skywarp181 Well-Known Member

DogFriedRice Well-Known Member

Ionus Well-Known Member

deathsheadII Not a Bounty Hunter yes?

Harleytron Decepticon

deathsheadII Not a Bounty Hunter yes?

Honesty honestly, Honesty!

Ricky_Stream Well-Known Member

pumpkingonzo Stunticon lover!

craftsmith Flying Spanner

deathsheadII Not a Bounty Hunter yes?

Zavien Veteran

BScorpinok75 Squadron X #1 Consultant

Useful Searches