Most of them were only printed and painted by me, Megatron is the most complex and interesting one. He is a mockup of several 3D models with a pinch of my own engineering. I also have a facebook page - Toras Workshop, be sure to check it out if you want to follow my other projects! Part 1 - Shockwave I recently got my first resin printer - Anycubic Photon. This was one of my first prints. Shockwave fits into 5mm ports, he's compatible with CHUG figures. Link to the project Part 2 - Soundwave Printed on FDM printer in various sizes (the medium one is the best in my opinion) I have a version that was printed on my SLA printer, but haven't painted that one yet. Link do the original project on thingiverse Part 3 - Megatron As I said it's a mockup made from several projects. The thing is that there isn't any CHUG compatible Megatron to print so I had to make one myself. I found the main gun body, scaled it down and split some of the parts. I also added necessary 5mm pegs and ports. Then I found a separate G1 Megatron scope replacement and added it on the top. The silencer is made by Printformers and originally it was made for Weijiang Megamaster. Finally I modeled the stock myself and added a little hinge at the base. The handle separates into 3 main parts. When detached the middle parts exposes two 5mm ports. The main gun part has two panels that can be adjusted to fit bigger and smaller fists. Links to the models used in this project https://www.thingiverse.com/thing:3117183 https://www.thingiverse.com/thing:2402954 Hope you like them!