(Note: I was never able to find out why this Radicon used sandpaper for this modification. Another piece of illustration board, cardboard, or a thin piece of styrene would probably do the job better. If you choose to proceed with the sandpaper as advised here, just know that sandpaper is used to remove material. Sandpaper could cause further harm to your figure. Proceed at your own risk! ~Superquad7)

I used a piece of sand paper as shown in the pictures to tighten up the loose leg swivel. This loose leg swivel won't allow him to stand correctly, and it makes it wobble. Once you follow these instructions, your Warlord's legs should be tight and ready to stand without wobbling.

Items needed--100 grit sand paper,tweezers,philips screw driver and an exacto knife.