Added a bunch of pics because I hate MEGATHREADS! I would just like to say "told you so!". http://www.tfw2005.com/boards/trans...17150-lets-talk-fp-menasor-3.html#post7069330 What I know so far: - $50 a piece starting in November for the limbs ($80 for Motormaster) Possibly $100 2 packs for the limbs? CAR CRASH! So much for the two packs? - Figures will release on a schedule of one every month or two (similar to Hercules). Two packs would change this. - Menasor should be completed by May I'd be impressed if this still happens - Motormaster will be voyager size with a trailer. Hands, feet, and accessories will store in the trailer. - 11.5" tall in combined mode - Deadend seems to be inspired by the Ferarri FXX. I saw grey and painted proto photos. Seems odd to me since he was a Porsche in G1 - Dragstrip seems to be based on the Lamborghini PML-F Formula 1 Concept. This is based on what I could see from the phone photos. MY EDIT I added a few more of my own pictures: Added per request of the poster Called it! Car Crash! STAFF EDIT: More pictures here: First look at Fansproject Menasor, Insecticon Repaints, Assaulter - Transformers News - TFW2005 TFcon 2012 Third Party Panel Coverage - Transformers News - TFW2005 CA-09 CAR CRASH (Breakdown) ALT-MODE: Lamborghini Reventon DIMENSIONS: Vehicle Mode; Width: 2'' (50mm), Length: 4.25'' (109mm) Robot Mode; Height to top of head: 4.65'' (115mm) REVIEWS: Pictorial: http://www.tfw2005.com/boards/trans...0550-fansproject-ca-09-car-crash-reviews.html Videos: http://www.tfw2005.com/boards/trans...ansproject-ca-09-car-crash-video-reviews.html AVAILABLE FROM: BBTS: Causality CA-09 Car Crash - Third Party Transforming Toys & Accessories FansProject TFSource: Fansproject - Causality CA-09 Car Crash Captured Prey: Fans Project: CA-09 Car Crash Kapow Toys: Fans Project: CA-09 Car Crash Ages 3 & Up: FansProject - CA-09 Causality Car Crash - Ages Three And Up KNOWN QC/DESIGN ISSUES & FIXES: *Leg transformation hard. Pegs may need sanding/filing *Foot is very hard to open. Make sure that the heel is folded out before the toe. *Some gapping in Alt-Mode. *Arms difficult to line up/peg in for Alt-Mode, and to un peg when transforming to Robot. Make sure that arms are fully slid back until a click is heard. Some filing might be required on pegs. *Gun is difficult to remove from it's pegs where they are stored in Alt-Mode. Slight sanding/filing might be needed. Make sure that gun halves are not pushed too far onto the tabs or excessive force will be required to remove them. CA-10 T-BONE (Wildrider) ALT-MODE: Lamborghini Ankorian (NB: This is not a real car. It only exists as a model created as a concept design) DIMENSIONS: Vehicle Mode; Width: 2" (50mm), Length: 4.25" (109mm) Robot Mode; Height to top of head: 4.75" (120mm) REVIEWS: Pictorial: http://www.tfw2005.com/boards/trans...s/841729-fansproject-ca-10-t-bone-review.html Videos: http://www.tfw2005.com/boards/trans...3-fansproject-ca-10-t-bone-video-reviews.html AVAILABLE FROM: BBTS: http://www.bigbadtoystore.com/bbts/product.aspx?product=FPJ10035&mode=retail TFSource: http://tfsource.com/fansproject/causality-ca-10-t-bone/ Captured Prey: http://www.capturedprey.com/store/fans_project_ca10_tbone?keyword=t-bone&category_id=0 Kapow Toys: http://www.kapowtoys.co.uk/fansproject-causality-bone-p-6209.html Ages 3 & Up: http://www.agesthreeandup.com/fansproject-ca-10-causality-t-bone/ KNOWN QC/DESIGN ISSUES & FIXES: *Gapping between door (arm) and windshield (Leg) in Alt-Mode. Dis-assembly of the arm may be required. *No clearence for the robot chest in Alt-Mode leading to poor rolling and paint scrapage. *Gun is awkward to store in Alt-Mode. *Slight gap between legs in Alt-Mode, on underside only. Some light sanding may be required. *Wheel gets in way of foot leading to slight balance issues. *As with Car Crash, ensure that arm is pushed all the way back until it clicks when transforming to Alt-Mode. *Some difficulty with leg transformation, although can be better than Car Crash as the wheels can be moved completely out of the way. Some light filing of pegs may still be required. CA-11 DOWN FORCE (Dragstrip) ALT MODE: Caparo T1 DIMENSIONS: Vehicle Mode; Width: 2.25" (57mm), Length: 4.5" (115mm) Robot Mode; Height to top of head: 4.5" (114mm) REVIEWS: Pictorial: http://www.tfw2005.com/boards/trans...fansproject-ca-11-down-force-hand-images.html Videos: http://www.tfw2005.com/boards/trans...nsproject-ca-11-down-force-video-reviews.html AVAILABLE FROM: BBTS: Causality CA-11 Down Force - Third Party Transforming Toys & Accessories FansProject TFSource: Fansproject - Causality CA-11 Down Force Captured Prey: Fans Project: CA-11 Down Force Kapow Toys: Fansproject Causality CA-11 Down Force - Kapow Toys Ages 3 & Up: FansProject - CA-12 Down Force KNOWN QC DESIGN ISSUES & FIXES: *Clear plastic windshield is brittle, and will break if rotated in the wrong direction or forced past it's stop point. It should be rotated CLOCKWISE when transforming from car to robot, and ANTI/COUNTER CLOCKWISE when transforming from Robot to car. Please note that the instructions show to rotate it clockwise for both transformations, they are wrong. Take it slowly and gently, making sure that there is nothing blocking the rotation (Head, shoulders and hips) and once you feel resistance, stop. Under no circumstances try and force it. *When transforming from robot to car, make sure that the feet are positioned BEFORE you slide the windshield back to Alt-Mode position. Take one leg at a time and make sure that the feet are not blocking the rotation bar under the windshield before you slide it back. Again, take it slowly, and if you fell resistance stop and check to see what's blocking it. *The front spoiler peice is very thin and susceptible to stressing or breakage. Be aware of it when posing (it ends up on his shoulders) and do not use it to pull apart the arms when transforming to robot. Instead use your nail to split them from the middle and open them out. *Some reports of the ball joint that attaches the nose of the car to his bicep sliding out. The ball joint itself is a seperate piece and may need glueing to keep it in. CA-12 LAST CHANCE (Deadend) ALT-MODE: Ferrari FXX EXPECTED RELEASE DATE, JULY 2013 DIMENSIONS: REVIEWS: AVAILABLE FROM (PRE ORDERS): BBTS: Causality CA-12 Last Chance - Third Party Transforming Toys & Accessories FansProject TFSource: Fansproject - Causality CA-12 Last Chance Captured Prey: Fans Project: CA-12 Last Chance Kapow Toys: Fansproject Causality CA-12 Last Chance - Kapow Toys Ages 3 & Up: FansProject - CA-11 Last Chance KNOWN QC/DESIGN ISSUES & FIXES: M3 (Motor Master) Currently slated for a September release. Price TBA. COMBINED MODE - INTIMIDATOR (Menasor) Projected Combined Mode Height: 11.5 Inches (295mm) KNOWN INFORMATION: *Limbs appear to be 'Scramble City' *M3 (Motor Master) Splits in half, half way along his trailer. The front section forms M3's Robot mode and Intimidator's Torso. The rear section contains all additional combined mode pieces and weapons. *It is not yet known whether the rear of the trailer can form any sort of base mode, but FP have apparently said that nothing is left over in any mode. *Intimidator's sword is formed from the side panels of M3's trailer. M3's shotguns are formed from the rear doors/bumper of the trailer.