got a couple of my models on ebay. all designed by me im still trying to find what works and doesnt. these are just a few there more to come bumble bee is still in the works i have to re do the whole model unfortunately.

toppercamacho on eBay

 

Gonna be brutally honest - I don't think those will sell. Maybe after a lot of sanding and resurfacing they will, but the print lines are too thick and obvious now. Your machine could probably use a good tuning as well, a lot of that looks like over-extrusion.

With so many flat surfaces, they would be fairly easy to sand down and maybe acetone vapor treat.

 

ill keep that in mind i use pla at the moment so no acetone. i was printing at .1mm but my printer kept jamming .2mm is what your are seeing right now i might buy a small electric sander to help improve the print quality. here is how Ironhide looks under more natural light which might be a better way to sell them also i got another cheap printer comming in. hopefully it wont jam at a lower layer height.

thank you for the advice

 

new design thought to get your guys thoughts. Im doing the whole crew of combaticons and I will be painting them using valejo paints. Also thinking about doing bruticus as a bust coming up behind them