I think Ive seen this posted before, but speaking of that APE... the domestic special at 4 dollars.

 

Here's another KO Gorilla  
Pretty nice one at that too!
Got it from @SirToys as usual   right here: Masterpiece MP32 KO - 3rd Party - SirToys.com
Enjoy!

 

Oh thank you very much! SHUNQIRUN definitely has very controversial and colorful items. It is to observe if it appears on Aliexpress.

 

I look for them every day on Aliexpress since they showed them to us, if I find them I warn here

 

Looking through the first few pages of the vast amount of KO toys on the site I found earlier.

Has anyone bought these before:

OSKO POTP Outback:

robot Transformation Solid color B#【English Packaging】essa.cn



VIDEO: https://oss.essa.cn/2923aef3-480f-48e0-8f5c-b8f58f5c2721.mp4



KO CW G2 Onslaught (in Hotspot colours):

robot set Transformation Solid color【English Packaging】essa.cn





And does anyone know what this is a KO of:

plane robot set Transformation Spray painting and solid color【English Packaging】essa.cn



VIDEO: https://oss.essa.cn/0f5250b8-740c-4424-a379-888c7c058982.mp4

 

That looks like a KO of Hasbro's Cyber Battalion Starscream. If it has ball-jointed elbows and knee joints, it's an improvement on the original.

 

I have OSKO Onslaught.



OSKO Onslaught and KO Seekers are sold by a company called Sejutoy in my country. I didn't see them clearly in Taobao.

 

If it is, then they also upgraded the look? Looks good though.

Korea? Didn't realize the Onslaught is an OSKO.

According to the listing, the height is 20cm, which is the same as the original, and he's pictured with the the G2 KO coloured one.

If it's OSKO, I would be very much interested. Are the ports oversized as well? Looks like yours has some mods going on there?

 

I looked again and most of it is definitely the Cyber Battalion. However, I think it has the arms of the Thrilling 30 Legends Starscream. That combination rings a bell. Does anyone else recall seeing a hybrid like that a couple of years ago?

 

OSKO Onslaught is about an inch taller. Combiner ports are compatible with Hastak, but the arms are stiff and the legs are loose. The overall joint was very loose, so I used varnish to increase the friction of the joints. No other modifications have been made, and combiner ports in the picture are equipped with 3d printed port extenders.(I gave them to CW Superion now.) After work, I will post comparative pics with original Onslaught at home.

 

Found another listing with 2 other different colours, with another video:

plane robot set Transformation Spray painting and solid color【English Packaging】essa.cn

Video: https://oss.essa.cn/b8c85a4e-f437-42b2-bbde-4c5dcbfb404c.mp4

Interesting. Would definitely appreciate comparison photos, juseyo!

I know the WeiJiang OSKO Hotspot is 24cm tall, way taller than the original.. Yours sounds smaller.

 

I have the Battallion Starscream KO (the one coloured most like Screamer) as well as the metal KO and the original figure - this one is nice in that it has knees that the original doesn't and you also get two sets of guns.

I wish I could find the Leo Kaiser coloured one or that nifty looking Black one though  

But yeah he's exactly the same size as the original jet just with knees and slightly inferior plastic.

 

Speaking of the CW KOs are the 1:1 exact copies? Will a C+ custom kit fit the hotspots ports/tabs?

 

OSKO is a little bit larger, some parts have been simplified, so C+ Custom won't fit.
Here are comparison pics.



The joints are very loose and all ratchettes have been deleted.


Unfortunately, Onslaught's neck articulation has also been deleted.


Hand's pegholes seem to be slightly larger than 5mm.


There is no hole, so left shoulder of Combiner is not properly locked.


The leg ports are too stiff. I didn't push the ports completely because I was worried about the damage.


The ports on the shoulders are larger than the original, but locking the chest plate can fix the arms. But it has a little empty space, so Combiner's arms are shaky.


Despite all these problems, Combiner is poseable!
It is recommended to increase the friction of the joints using varnish or superglue.


Honestly, it's not good OSKO. Lowering expectations may not be bad. I'm repurposing this as G2 Mindset.

 

Can anyone give me any info on this KO? I’ve had it for YEARS, and now only took it out and messed around with it. Thanks! (Pic is of the exact one, but this is a Google image)

 

It looks like an undersized(?) off color Liokaiser

 

Very off color, but It’s about the same size. There are no markings on it though. There is one picture of him, this one, on a site called “worth point” but it’s a site you have to pay for.

 

thanks for the info on the OS KO. I was just wondering about the 1:1 KOs. the defensor to be more exact. Just wondering if the ko are exact copies so I could fit the c+ custom upgrades. i use to have the 1:1 dinobots and the real dinobots but sold those so I cant compare molds.

 

Thanks for all your photos and detailed explanation. Very much appreciated. Have save your post for future reference. Still considering this guy.

Yes they are, but I've not tried to fit any upgrades on it though.

 

Maybe like these but better plastic. These were PVC.