https://www.amazon.com/gp/product/B07MXXYT6H/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

 

Hello anybody here knows something about the release of mf-49b?

 

I am currently designing some accessories for MFT Cyclonus and Scourge. They are 80% sized Targetmasters with 4mm handles. Should work on them!

 

I actually found something called "plasticiser" that works too - it's designed to seal terracotta kitchen floor tiles so if you spill something like red wine on them they won't stain or also to seal exterior brickwork or concrete exposed to constant moisture. So basically it's labelled as building sealant - at first I thought it was just very thin PVA mix - but looking at the ingredients it's not. Looked like it came from a builders merchant rather than a more usual store though.

I doubt it's anyone ideal solution I just happened to trip over a large bottle for practically free so I thought i'd mention it - I'm mostly using Nail polish top coat for holes and post connections and floor polish for hinge joints and it does work really well ironically I bought some random white coloured peach smelling stuff for a giggle and that actually works best (the smell has long since disappeared) as you can see where it's going as it's white and it tries completely clear and doesn't go powdery or look like a blop of varnish it was only like £2 a bottle too.

I just did my old rag doll floppy Beast Hunters Wheeljack only yesterday and it's worked a proper treat - it also was very useful in tightening the Wobbly hips Ironworks had too. I just bought another Earthrise Hoist to customise so as I have to disassemble that I might use varnish on that instead. Though if you can get a joint apart and you arefeeling patient a dab of glue can work too, I got some glue to seal leaks in my plastic water butt and that glue might work well too so long as I let it dry completely before reattaching the joint and pin.. perhaps I'll try that - hopefully it won't weld it shut - LOL

One happy accident of sorts I had too was I left some floor polish in a bottle about an inch worth and it has partially dryed up almost set solid into a paste which might actually have some uses too I guess.

 

Outside of being released some time in January 2021? I don't know how accurate that is but that's what I found.

 

Has anyone heard any updates on MFT Blitzwing, Octane and Skullcrunchers release dates? From what I saw on the pre orders was there due to come out these next few months but nothing concrete.

 

@Impactor666 i suppose that we won't see any effective release until summer 2021. I am waiting for blitzwing and octane too.

 

Cool thanks for the update I was hoping they were just round the corner but if not happy to wait as they look awesome and I need them for my decepticon legend army

 

I don't own MFT Galvatron, but plan to get it. Can anyone confirm it has 4mm grip like Cyclonus and Scourge? I want to give it a custom Targetmasters named Nucleon.

Also, are we getting a Nemesis Prime for my Nemesis Minor Targetmaster?

 

I know these are long gone, but is there any way to buy the OS Nemesis Prime?

 

last i checked they could be found on ebay for like 10 bucks.

 

I only ever see the ones in Optimus Prime colors. Sirtoys, ebay and AliExpress are sold out it seems, unless you have a link?

 

I did see some of the rarer ones about july time - not seen them for a while. Unfortunately they often get listed under wacky nons

I did see some of the rarer ones about july time on ebay (like Cliffjumper and Huffer Blackout & Warpath) - not seen them for a while. Unfortunately they often get listed under wacky nonsense names so are hard to find on ebay - I'd suggest asking 'HZJ401' on ebay - They may have some left or know where to get them.

You might get somewhere looking for common KO's and checking the other items people sell or checking each seller that sells MFT products individually - I think last time I found them I was looking for that Deluxe under-scale Movie Prime KO.

It is a shame when you miss something you wanted though I regret not getting the overscale Movie Scouts myself.

I also still can't find they slightly repainted and repackaged Huge Dragon / Omega Supreme though - It is supposed to be out in a lot of places outside China.

 

Where did you put the insignia on Hardhead and Galvatron? Not sure about Hardhead if going shoulders or chest, and Galvatron... well, there is only one possible spot on the chest but its not very cartoon accurate and I don´t really like it, probably left him without insignia...

 

Have you guys seen this? There is a white version of the Stellar Knights Police Team, numbered AGS-05. Show-Z has a listing for it and apparently it's in stock and not a preorder (unlike the black AGS-04 and blue AGS-03, both of which are still showing as preorder). Just another one to add to the list:

MechFansToys & Mechanic Toys AGS-05 Stellar Knights Police

 

I saw that a couple of weeks ago on ebay - completely forgot to mention it though, seems to be an instock item I kinda forgot about it as they seem a little bit overpriced to me for what they are.

 

if i can be slightly serious and heartfelt for a moment.
my girlfriends sister has a middle stage cancer in her chest. as you can appreciate this has rocked everyone around us, and my girlfriend is perpetually upset.

she is 'braving the shave' (a uk fundraising thing where you get donations and shave your head) at the start of december.

i really want to help make an impact, i dont have many friends, or a social network, facebook etc, transformers is my closest thing to a social group.

i realize its not what this forum is for, but it would really mean alot to me to help my girlfriend. or if you could share this page to your social networks it would really help.

Help raise £3000 to fund my sister's cancer ward by BRAVING THE SHAVE

its a very scary time to be honest.

thanks for your tolerance. i hope this post doesnt get removed  

kindest regards

dan bragg

 

@eliot this is not the right place for your post.
Better to post in "general discussion"

 

Quick question for you Mech Fans Toys collectors, hope you don't mind me asking.

I wish to add the MFT Dinobots to my Legends collection and I'm specifically interested in the toon color variant of the set. Now, I've found a collector selling the whole gang in bundle, but there's one thing that got me curious: Swoop, Slag and Sludge come in nice looking cardboard boxes, with Japanese (?) texts and a 'Newaoli' logo, in addition to the MFT one. Grimlock and Snarl, on the contrary, are packed into cheap looking cardbacks and plastic bubbles, once again with a second logo - saying 'Planet Dinosaurs' - alongside the MFT symbol.

Is this the way they came out originally? Or the guy simply mixed up two different releases in one set? I'd much prefer to have them all properly boxed, to be honest, but if that is the only way to get the toon Dinos, I'll bite the bullet and grab the cardbacks anyway.

Thanks in advance, guys!

Edit - Thanks so much, @Dutchy79.