Have tried the Gun mode...

So, here is my experince

His wing is the thing that you need to watch out. You need to pull the black parts out of his shoulder until all white metal stick out...

And the wing rotation is stiff... make sure to rotate it fully

But once all of it done, you will have enough clearance to clip the gun form handle. It is not hard click, just a soft locking mechanism with clear window.

Don't force anything, if you have hard time, reevaluate the previous step.

 

Decepti Breasts got me feelin so satisfied.  

 

tits the breast spot for logos

 

Another review on Hydra.

Edit: Two hours later.. I did I post this? Guess not..

 

Looks great! Mind me asking what kind and where you got those con decals?

 

Try here: Cartoon Clean Symbols

 

2018 New Ocean Cartoon style Clear background Decepticon Logo Water Applique,In stock! - Ocean Logo Decals - Decals & Poster

 

Wow! Okay, forget Toyhax; value-for-money-wise, unclebilly's where it's at!

 

@brianfitz
I think these dry apply ones (link below) would fit the bill too. Although water decals are cheaper, they take much more effort to apply (and are therefore so much more prone to screw ups), from softening, sliding it off, and cure time.
Ocean Transformers Carton style Decepticon Decals,In stock

 

Best.

 

The head is made from 3 parts and the eyes are a 4th part. They should have did the pearl white like the painted on Quietus

 

Got mine today, Finally from ShowZ. Please overall but the loose left knee and the wobble from side to side on the lower part of both knees

I fixed those and found a way to get more ankle tilt by removing the foot assembly and grinding the plastic on the inside part of the leg to allow more movement..EXTRA TILTAGE!! Removed some plastic to tilt the wings up more and took the ratchets out of the shoulder joint. Fanstoys have this thing where the clicks are too far apart on the shoulders, so either too close to the body or wait for your deodorant to dry looking arms. My Friend Sixshot!!

I will be painting a clear pearl over the whole figure when I am done detailing him

 

Ninja consultant in the house!
Still amazed he can cross his arms (somewhat) cockily.

 

One sticker slightly lower/uneven from the other to add to the natural feel perhaps?  

 

I ended up leaving the faction symbols off of mine for that authentic Headmasters feel.

 

How do you fix the side to side wobble on both knees? This is the part that bothers me the most about this figure. The knee joint is so small it feels like it could easily snap off, and the side to side wobble makes it feel even more fragile. If there's a good way to eliminate the side to side knee wobble I'd love to try it.

 

The purple square part that holds the lower knee joint, where the 4 screws are, tighten all 4 screws. for some reason those aren't tightened all the way in. Plus, pull down the top of the knee joint ( the black part) to tighten the single screw. This seems to be an issue with most copies of the figure. Fanstoys QC seems to be slipping further away from what they were known for. Hope this helps...

Same here bro!!