By Generation: RtS Grapple Crane Modification - An EASY One!

Discussion in 'Tutorials and How Tos' started by Irish Carnage, Apr 14, 2011.

Thread Status:
Not open for further replies.
  1. Irish Carnage

    Irish Carnage Instrument of Destruction

    Joined:
    Apr 9, 2011
    Posts:
    1,528
    News Credits:
    1
    Trophy Points:
    212
    Likes:
    +128
    This is a quick tutorial for voyager Inferno and Grapple.

    Tools needed:

    • Drill
    • 5mm drill bit
    • 8mm drill bit
    • Super glue
    • 5mm peg of some kind, i used a 5mm metal shelf stud but a Mincon peg will work too.
    • Oh and a Grapple and/or Inferno too.

    Let’s begin!
    First, on the back of the figure’s waist is an indentation which is 5mm; drill into this. Don’t worry - it won’t affect transformation in any way. Once you've drilled the hole, test fit the 5mm peg. When you're satisfied with the fit, glue the peg in place. You now have a place to attach Grapple's crane and Inferno's ladder [if you have one]. Now, [on] the final piece on the black spine piece (that’s what I call it, but you know what I mean) drill an 8mm hole so the peg can get through when in vehicle mode; the pictures show what I mean.

    If you have the TFC-004 Gear of War Accessory Set ladder, you can attach inferno fire hose gun to it very easily too and he'll have a shoulder canon. First remove the arm attachment piece (mine is black and the gun itself is chrome) and attach another 5mm peg in the hole on the underside of the gun. Glue it when you're satisfied with the fit. Once dry this piece will fit into either hole at the base of the ladder.

    Pictures are below:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

     

    Attached Files:

    Last edited by a moderator: May 4, 2011
Thread Status:
Not open for further replies.