Water-Slide decals (Faction Symbols & Cobracon) Hey guys, I've been getting a ton of requests for these lately. It was suggested to put this here. I've built a graphics file (vectorized) of Autobot and Decepticon faction symbols. These can be printed on white or clear decal sheets. · I have a top of the line ink jet printer. The graphics are razor sharp edged. No blurring or distortion. · I print at a photo-quality setting, and have done all the testing necessary to get the best quality decals. The sheets are sprayed with a testors fixative so there is no bleeding when water or clear coat is added. These come PRE-CUT. It's up to you to cut them all out, as you need and use them. The "faction symbol" sheet will also come with an instruction sheet. I am in the US, yet can ship anywhere (additional cost for shipping) The sheet is 8.5" wide by 5.5" in height. The faction symbol sizes are what I've typically had need for. Dimension Specs: Rows 1&2 : 0.2" height Rows 3&4 : 0.3" height Rows 5&6 : 0.4" height Rows 7&8 : 0.5" height Rows 9&10 : 0.7" height Sheets are $10 each, price breaks if you order several. I can also make custom decals of any size, even scratch build the graphic files for you. To place an order, send an email to firstname.lastname@example.org Cobracon Sticker sets: These are also $10 and can be printed on clear or white decal sheets. They are SUPER high resolution, laser sharp edges.