Repro/Sticker: Transformers Inserts and Card Board Backers

Discussion in 'Radicons Customs' started by ptrckcrw2, Nov 24, 2012.

  1. ptrckcrw2

    ptrckcrw2 Well-Known Member

    Joined:
    Feb 2, 2012
    Posts:
    158
    Trophy Points:
    56
    Likes:
    +0
    Ebay:
    I recently made a few new plastic inserts to fit the original G1 figures. However, I do not have the cardboard backers for them. If anybody can give me the measurements of the cardboard backers, it would be extremely helpful.

    Please send measurements in mm. Also let me know where the fold lines are.

    Need measurements for:

    Snapdragon
    Motormaster
    Blitzwing
    Divebomb
    Headstrong

    If you have any G1 Inserts you wanted made and have the orignal send me a PM.
    1984 Completed
    If you have the inner inserts for any of these figures, please contact me.

    Blustreak
    Ironhide
    Jazz
    Mirage
    Prowl
    Ratchet
    Sideswipe
    Sunstereaker
    Trailbreaker
    Skywarp Satrscream
    Thundercracker
    Huffer (Have, but not completed)

    1985 Completed
    If you have the inner inserts for any of these figures, please contact me.

    Grapple
    Hoist
    Red Alert
    Skids
    Smokescreen
    Inferno
    Tracks
    Bombshell
    Kickback
    Shrapnel
    Barrage
    Chop Shop
    Ransack
    Venom
    Whirl (Have, but not completed)
    Beachcomber (Have, but not completed)
    Cosmos (Have, but not completed)
    Powerglide (Have, but not completed)
    Seaspray (Have, but not completed)
    Warpath (Have, but not completed)
    Thrust (Have, but not completed)
    Bonecrusher (Have, but not completed)
    Hook (Have, but not completed)
    Long Haul (Have, but not completed)
    Mixmaster (Have, but not completed)
    Scrapper (Have, but not completed)
    Scavenger (Have, but not completed)
    Gimlock (Have, but not completed)
    Slag (Have, but not completed)
    Slug (Have, but not completed)
    Snarl (Have, but not completed)
    Swoop (Have, but not completed)
    Twin Twist (Have, but not completed)
    Topspin (Have, but not completed)

    1986 Completed
    If you have the inner inserts for any of these figures, please contact me.

    Silverbolt
    Motormaster (Completed, need dimension of card board backer)
    Hot Spot
    Onslaught
    Broadside
    Octane
    Sandstorm
    Springer
    Hupcap (Have, but not completed)
    Outback (Have, but not completed)
    Pipes (Have, but not completed)
    Swerve (Have, but not completed)
    Tailgate Wheelie (Have, but not completed)
    Air Raid (Have, but not completed)
    Fire Flight (Have, but not completed)
    Skydive (Have, but not completed)
    Slingshot (Have, but not completed)
    Breakdown (Have, but not completed)
    Dead End (Have, but not completed)
    Drag Strip (Have, but not completed)
    Wildrider (Have, but not completed)
    Blades (Have, but not completed)
    First Aid (Have, but not completed)
    Groove (Have, but not completed)
    Streetwise (Have, but not completed)
    Swindle Vortex (Have, but not completed)
    Blast Off (Have, but not completed)
    Brawl (Have, but not completed)
    Runabout (Have, but not completed)
    Runamuck (Have, but not completed)
    Ramhor & Eject (Have, but not completed)
    Ratbat & Frenzy (Have, but not completed)
    Rewind &Steeljaw (Have, but not completed)
    Scourge (Have, but not completed)
    Rodimus Prime (Have, but not completed)
    Wreck-gar (Have, but not completed)

    1987 Completed
    If you have the inner inserts for any of these figures, please contact me.

    Hun-Grr (Have, but not completed)
    Blot (Have, but not completed)
    Cuthroat Rippersnapper (Have, but not completed)
    Sinnertwin (Have, but not completed)
    Afterburner (Have, but not completed)
    Lightspeed (Have, but not completed)
    Nosecone (Have, but not completed)
    Strafe (Have, but not completed)
    Chase (Have, but not completed)
    Freeway (Have, but not completed)
    Goldbug (Have, but not completed)
    Rollbar (Have, but not completed)
    Searchlight (Have, but not completed)
    Wideload (Have, but not completed)

    1988 Completed
    If you have the inner inserts for any of these figures, please contact me.

    1989 Completed
    If you have the inner inserts for any of these figures, please contact me.

    1990 Completed
    If you have the inner inserts for any of these figures, please contact me.

    1984 (Inserts Needed)
    Brawn
    Bumblebee
    Cliffjumper
    Gears
    Windcharger
    Optimus Prime
    Megatron
    Hound

    1985 (Inserts Needed)
    Roadbuster
    Perceptor
    Omega Supreme
    Blaster
    Shockwave

    1986 (Inserts Needed)
    Divebomb
    Headstrong
    Rampage
    Razorclaw
    Tantrum
    Blurr
    Hot Rod
    Cyclonus


    1987 (Inserts Needed)

    Battletrap
    Flywheels
    Doublecross
    Grotusque
    Repugnus
    Fastlane Cloudraker
    Pounce Wingspan
    Punch Counterpunch Brainstorm Chromedome
    Hardhead
    Highbrow
    Mindwipe
    Skullcruncher
    Wierdwolf
    Blurr
    Crosshairs
    Hot Rod
    Kup
    Pointblank
    Sureshot
    Cyclonus Misfire
    Scourge
    Sluslinger
    Tiggerhappy
    Apeface
    Snapdragon
    Sixshot
    Scorponok Fortress Maximus

    1988 (Inserts Needed)

    1989 (Inserts Needed)

    1990 (Inserts Needed)
     

Share This Page