I picked up a cyberverse Breakdown the other day and I like his weapon so much that I decide to mount it on my voyager Breakdown. i drilled a hole in the bottom the cyberverse weapon, which was a bit tricky I found because of the softer plastic it's made from. As a reuslt the hole is slightly off center but it still looks fine. I painted the tip of the cannon and the body of the cannon in testors acrylic aluminium, I left the barrel of the cannon untouched. As I recall that's how it appeared in the show and the cannon is fairly show accurate, for his vehicle mode at least. I think in robot mode it's the same cannon just minus the long barrel. I used a 5mm shelf stud as the port because I couldnt find anything else and I just glued it in place. This is a super easy and super quick mod, the most time consuming thing was waiting for the glue to dry. I also included some pictures of the cannon in alternate postions and some pictures of AM Skywarp's micron which looks really well with Breakdown in robot and alt mode. The pictures also show how I store his rhinohammer in alt mode, it keeps the hammer pretty much out of the way and doesn't interfere with the overall asthethic of the alt mode too much. I like to postion the shuriken/drill micron as a radar dish type thing in alt mode. All comments and constructive criticism are welcome.