By Generation: Scoria - Loose Arm Fix

Discussion in 'Tutorials and How Tos' started by Grimlock4523, Jun 26, 2014.

Thread Status:
Not open for further replies.
  1. Grimlock4523

    Grimlock4523 Me Grimlock, KING!!!

    Joined:
    Aug 14, 2013
    Posts:
    2,138
    Trophy Points:
    202
    Likes:
    +231
    LOOSE ARM FIX

    ***Of course proceed at your own risk***

    I used this product to tighten up the arms on Scoria. This was not as easy as the jaw fix, but was easy enough. Now my Scoria's arms are tight. It took 3 coats by the way.

    1. Get this stuff:

    I bought it at Walmart. Just be warned, this stuff is sticky so I recommend using gloves. Try to avoid getting this stuff on your fingers or else you may transfer it onto your Scoria. You will also need a toothpick and Q-tip.

    [​IMG]


    2. Remove the shoulder:

    I did this in DINO mode with the arm abducted slightly.

    CAUTION: DO NOT FORCE THE SCREWS!

    [​IMG]

    [​IMG]

    [​IMG]


    3. Remove joint:

    [​IMG]

    [​IMG]



    4. Coat the exposed peg:

    [​IMG]

    [​IMG]



    5. More coating:

    [​IMG]

    [​IMG]



    6. Allow adequate time to dry:

    Be patient. I let it sit for about half a day to 24 hours between coats.



    7. Reassemble the arm:

    [​IMG]

    [​IMG]
     

    Attached Files:

    Last edited by a moderator: Aug 29, 2014
    • Like Like x 2
Thread Status:
Not open for further replies.

Share This Page