By Generation: RtS Turbo Tracks/ Generations Wheeljack Windshield Removal

Discussion in 'Tutorials and How Tos' started by roaddemon2001, May 16, 2012.

Thread Status:
Not open for further replies.
  1. roaddemon2001

    roaddemon2001 Mr. fixit

    Joined:
    Sep 4, 2010
    Posts:
    535
    Trophy Points:
    101
    Likes:
    +0
    While working on a Tracks reshell, I thought I’d show you what I did to remove the windshield, and how I fit my Corvette.

    It's easy stuff.

    Take off the windshield to fit the body. At the top of the windshield are two plastic tabs at the hinges. Cut them off with a Dremel or X-Acto knife. The shield rises to expose the screws. There is no real harm to Tracks or Wheeljack:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Personally, I don't understand why they limited the movement of the shield. Now it’s open to mod under it if you want. You know "guts of the mid-section. Besides , I’m accident prone. Probably would run my driver into my hand.

    [​IMG]


    (Here is a link to the reshell project in question: http://www.tfw2005.com/boards/radicons-customs/407898-rts-tracks-reshell.html ~Superquad7)
     

    Attached Files:

Thread Status:
Not open for further replies.

Share This Page