WTF ? how do you do it ? ....I took out the one screw and nothing...must be glued ? Any advise from someone who HAS done it would be great ! HELP ! ....I don't want to damage it ..... ......
Hmmm... I don't remember mine giving me any trouble. I have the 20th Anniversary version though... maybe the new DVD version is glued. Hey... you get to see Prime's secret mouth if you disassemble the head! zmog
For DVD Prime's head, the pin holding his two "antennae" together needs to be removed. The pin runs from one side to the other through the center of a horizontal "tube" section which is all one piece with the left antenna. The right antenna is just a shorter piece that caps over it on the side with the pin's head. What I did was drill through the plastic of the left antenna side right through the center of the circle. I used a 2.5 or 2.75mm bit in a pin vise. It's just a layer with a round cavity behind it of 2.8mm diameter. When I drilled through, I could see the other end of the pin. This seems like a fairly clean method which lets you tap the pin out. Unfortunately, I did not have a proper implement with which to do this so I just got impatient and clipped the plastic part behind Prime's face that holds his head on the ball joint of the neck. =) (Don't do that, btw, if you want to keep your head.)