By Generation: Generations FoC Vortex - Easy Improvement

Discussion in 'Tutorials and How Tos' started by xueyue2, Mar 27, 2013.

Thread Status:
Not open for further replies.
  1. xueyue2

    xueyue2 Well-Known Member

    Joined:
    Jul 9, 2011
    Posts:
    760
    News Credits:
    2
    Trophy Points:
    147
    Likes:
    +210
    The biggest issue for Generations FoC Vortex is the tail, [it's] too small and [too] short. And when transform[ing] into the Bruticus, the tail just doesn't fit:

    [​IMG]


    I found using RotF Blaze Master tail, I can easily fix that issue.

    1)As shown in the picture below, cut the red pole in the left yellow circle, then modify the right yellow circle part a little to make it fit. Then just screw them together.

    [​IMG]


    2) I repainted the tail, the blade and the weapons together. Since I don't have a fit red color, so I just painted them all black:

    [​IMG]


    [This has] almost no impact to the original part, except in helicopter mode, [as] the combiner slot needs to be down all the time:

    [​IMG]


    3) . . . . and it sure looks better in [the combiner arm] mode:

    [​IMG]


    4) This is the robot mode, [and it] looks better, too:

    [​IMG]


    from side:

    [​IMG]


    back view:

    [​IMG]
     

    Attached Files:

    Last edited by a moderator: May 11, 2013
Thread Status:
Not open for further replies.

Share This Page