The Combiner Wars Brawl is a very versatile figure but let's admit it his posture is aweful, he does not have an abdomen and he is just too short. I designed a kit to address these problems and here's the result: First off, he gets a much needed height boost (about 10mm) Then, look closely, he's got a panel for his abs too! This panel clicks into the groove on the combiner port to prevent his upper body from flipping backward. Unfortunately, doing so he also loses his waist articulation. So your call to keep it or not The two ball joints move up and down, I took the inspiration from no other than Breakdown: Transformation still possible, although I need to push very hard to reduce the gap. Also in the back, I left a hole for a long bolt to secure the front and rear halves of the crotch.