Everyone be careful with Warbot Defender. A friend just bought a lot from BBTS with a snapped in half Warbot Defender. We took a look at it, and we noticed his top half is just glued together in two places. So if you put enough stress, snap it comes off. He customized it and it was an extremely easy fix. That part should have been Screwed together and not glued. I just hope that over the years the glue doesn't dry up and snap. I will see if I can get him to snap some pics of it so that we can all see what I am referring to. The good news is a little crazy glue will fix it, if not the figure will hold together by itself cause there are snaps.