Illustrations/Digital Models: Tutorial: Creating a Custom Box, Part One

Discussion in 'Tutorials and How Tos' started by joopsta, Oct 30, 2007.

Thread Status:
Not open for further replies.
  1. joopsta

    joopsta Masterpiece, Encore and 3P collector

    Joined:
    Jul 6, 2007
    Posts:
    1,864
    News Credits:
    7
    Trophy Points:
    287
    Location:
    Westland Netherlands
    Likes:
    +1,690
    For a few months now I create custom boxes.One month ago I designed a Japanese Dirge box
    for a Dutch forummember who collects Japanese MIBs. Dirge is the only seeker that never came
    out in a Japanese box. In this thread I will show you a step by step guide on how to create
    a nice custom box.

    The finished box with Starscream reissue as a reference:
    [​IMG]



    1. Designing in Photoshop.
    This is basicly most of the work. The Dirge box took me about 25-30 hours.
    This mostly had to do with searching all the Japanese characters out of thousands of characters.
    If you can handle photoshop a little, it will take about ten hours to create a box. It's basicly 80% cutting and pasting.
    Antoher few tips:
    - In a new file, put your settings on 300 dpi, CMYK colour.
    - use photos with a resolution as high as possible.
    - create every side of the box separatly, after that, paste them together.
    - check the size thoroughly.
    - Try to make such a size, that it can be printed on a standard size paper (A1,A2 etc.).
    - When it's finished, save it as .PDF, every photoshop store can handle that extention when printing the box.

    I'll try to create a step by step tutorial on creating a box in photoshop in the future.

    2. Printing.
    The Dutch forummember, who requested the box, printed out the designs at a customer of his work..
    I still have to find out what kind of paper it is, but it's kinda posterlike paper,
    just in between matte and glossy.I think the local printshop can help you out on that.

    3. Folding the box.
    Things you need:
    1. hobbyknife, a qualitively good one, I use Scandia.
    2. scissors
    3. gluespray
    4. a metal ruler
    5. glue
    6. an overheadsheet, for the window (both side glossy)
    7. white cardboard
    8. disposable nail files



    [​IMG]

    Spray the cardboard with the gluespray and glue the print on the cardboard.
    After that push the print on the cardboard to evade bumps.
    [​IMG]

    Let it dry.
    Cut away all the non used cardboard. Then slice out the print with the use of the metal ruler.
    Make sure you replace your cutting blade a lot!
    [​IMG]

    Some edges we cut later on or is going to be used for glueing.
    [​IMG]

    Now comes the hard part, cutting the inner shape.
    This is a tough job, one flase move and it's too late.
    Try to slice the straight parts with the ruler and the bendings
    just by hand. TAKE YOUR TIME!!
    [​IMG]

    After that, you can file the edges with the nailfile. This way the edge will get
    nice and tight.
    [​IMG]

    The current progress:
    [​IMG]


    Second part soon!!!!
    Any questions, just pm me.

     

    Attached Files:

Thread Status:
Not open for further replies.