After my detailed analysis, I can point out the transformation of Lockdown UT through the various components of the car placed on the body of the robot: (photo 1) - the front section of the car's front bonnet (purple color) becomes the upper part of the robot's bust, where the head is positioned, and through the joints, the shoulders (arms) are fixed; in car mode, the head is positioned in the front bonnet, inside the robot's chest structure (red color), the latter highlighting in the reflection of the floor below the car's hood. The front bonnet and the windshield form the front structure of the robot's bust (yellow color), and the side windows are located at the sides of the basin (blue and light blue). (photo 2) - The rear window (light green) and the car roof (dark green), form the robot's back structure (under the rear window there is the backbone in evidence); the side doors (yellow color) are the base of the robot's feet, and that little triangular piece of the car's side (orange color) folds forming the heel. The three segments of the side of the car (purple, brown and blue color), form the back of the legs (lower sections), and the two parts of the rear lights form the robot's calves (red color). (photo 3) - In the car transformation, the legs of the robot rotate outwardly by 90°, the thighs are joined, and through the double knee joint, the two leg frontal sections are folded to the sides of the thigh so as to position and join the back of the car there is a joint on the inside of the elbow, which moves 180° the outer arm section (along with the forearm) to the inside of the front fender (hiding the arms under the car); the hands are placed in the forearm that open in two. (photo 4) - The visor of the helmet is an additonal component, and the two holes on the forehead and nose are the graft; instead, the gun grafted to the robot's head to form the "gunface", similar to the Hasbro Lockdown AOE Deluxe Class (with a particular, a back stick as a block structure that is supported on the backbone).
This is the difference in height between: Optimus AOE Leader Class and Lockdown UT, with the latter lower that a centimeter!
That's one ginormous head-gun... this either needs to have the best balance of any 3rd party KO or they might have to put in an extra "invisible" stand to brace the length of the gun and keep the figure upright.
According to the latest updates, these are Lockdown UT details: in car mode, it has a height of 4 cm and a length of 17 cm (in line with MPM-3 car mode); in robot mode it is 24 cm high, in line with most of the Optimus of the films... instead, with the reference AOE Leader there are two options, A) the "First Edition" of 25 cm (perfect in size comparison), B) and the "Generation Leader" (along with the TLK-15 and AD-31) of 23 cm, too low for the size comparison, with reference to the two CGIs of the film. MPM-3 is Lockdown UT, are more or less, in proportion with the two CGI of the film. List of Lockdown UT accessories: 1) the cannon has a remarkable variety of use for the robot, as well as forming the famous "Gunface" (via a spring mechanism at the base of the weapon), can be used manually (with one or two hands), and can be hooked to the back of the robot... can also be used for the car mode, positioned above the car (the grab is behind the rear window). 2) The helmet visor is an add-on that should be positioned after disconnecting the robot's face (other add-on). 3) The hook connects to the back of the hand (after folding it to the side of the forearm). 4) The "seed" is a particular accessory of the film (TF4), where Lockdown hand it over to CIA agents, after the capture of Optimus. 5) The dog is interesting because it is not a fixed statue, but it is equipped with various joints (jaw, neck, shoulder-elbow-wrist of the front paws, thigh-knee-ankle of the rear paws); the weapon of Lockdown, connects on the dog's back.
